coDiagnostiX Knowledge Base

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Advanced Settings ======
These are undocumented features or settings to tweak coDiagnostiX to certain needs.

===== Startup Parameters =====
The following parameters are available for use since a given version.

  * Automatically import DICOM from given directory (v9.5.1):\\ ''coDiagnostiX.exe /DICOMImport /dicomstartdir="[Path to dicom files to read]"'' 

  * Automatic DICOM import with EASY mode from given directoy (9.5.1):\\ ''coDiagnostiX.exe /coDiagnostiXEasy /dicomstartdir="[Path to dicom files to read]"''  
===== caseXchange Upload Speed =====
**Available with: v9.6.1**\\
coDiagnostiX will limit it's upload to 95% to avoid Internet problems with fully blocked upload bandwidth.

<file ini Application.ini>
[caseXchange]
MaxSpeedPercent=95
</file>

===== Drill Table Mode (gonyX/SKY5X) =====
**Available with: v9.2.0**\\
coDiagnostiX can use templiX and Bredent SKY5X plates & pin mode.
Use ''Mode=IVS'' for gonyX, ''Mode=Bredent'' for SKY5X.

<file ini coDiagnostiX.ini>
[ReferencePoints]
Mode=IVS
</file>

**Available with: v9.6.0**\\
coDiagnostiX will show a one-time message to set the Drill Table mode to gonyX or SKY5X (Bredent). Afterwards the ini setting below needs to be changed 0 to show the selection wizzard again with the next start.

<file ini coDiagnostiX.ini>
[ReferencePoints]
SelectionShown=0
</file>